What exactly is the MPX-1g? A stereo generator? An MPX over IP codec? An FM rebroadcast receiver? The answer depends on where and how it is used.
Broadcast infrastructures come with different requirements. Some installations need to generate and distribute FM signals, while others rely on rebroadcasting, backup solutions or signal monitoring. The 2wcom MPX-1g brings these applications together in a single device, adapting to different roles within the broadcast chain.
From FM Signal Generation to IP Distribution
Let’s start with the most common application: RDS encoding. The MPX-1g replaces our old C04 RDS encoder, providing the same core functionality while offering much more when needed.
The MPX-1g also includes a stereo encoder. Both functions can be combined to generate a complete FM multiplex (MPX) signal. Alternatively, the stereo encoder can be used on its own when RDS encoding is handled by another device.
However, generating the signal is only one part of the process. When studios and transmission sites are geographically separated, the MPX signal also needs to be transported reliably. In this case, the MPX-1g can operate as an MPX over IP codec, enabling distribution across IP networks using either uncompressed PCM or bandwidth-reduced transmission. Rather than serving one fixed purpose, the MPX-1g can take on different roles depending on the infrastructure and application. A range of hardware and software options allows broadcasters to tailor the device to their specific needs, selecting the functionality they actually require.
This flexibility allows broadcasters to adapt signal distribution to their available network capacity and infrastructure requirements.
Rebroadcasting and Backup Applications
Not every transmission site receives its signal through a dedicated studio-to-transmitter link. Sometimes, an existing broadcast provides the source for another transmission.
As an FM rebroadcast receiver, the MPX-1g receives an off-air FM signal and makes the recovered audio or MPX available for retransmission. The same functionality can also support backup applications, providing an alternative signal source if the primary distribution path becomes unavailable.
The MPX-1g can also bridge digital and analog broadcasting. In DAB-to-FM rebroadcasting, audio from a DAB service is used for FM transmission. Its PAD-to-RDS DataBridge additionally enables the conversion of DAB metadata into corresponding RDS information. For example, Dynamic Label information can be transferred into RadioText, helping preserve programme information across both standards.
Monitoring and Reliable Operations
Beyond signal generation and distribution, the MPX-1g can also support day-to-day broadcast operations.
For convenient remote listening, audio can be provided as a compressed IP stream, allowing operators to check the current programme without a dedicated receiver at their monitoring location.
At the same time, RF, MPX and RDS monitoring helps identify signal irregularities and potential transmission problems. Combined with alarm functionality, this supports early fault detection and more efficient troubleshooting.
One Box, Many Different Jobs
These capabilities allow the MPX-1g to fit into a variety of broadcast architectures, from traditional FM transmission and MPX distribution over IP to FM rebroadcasting, DAB-to-FM conversion and redundant signal paths.
Rather than serving one fixed purpose, the MPX-1g can take on different roles depending on the infrastructure and application.