FlexXtractPlus DAB Distribution Extractor

FlexXtract+ DAB+ Distribution Extractor

Professional EDI/ETI converter (EDI ETI)

Professional EDI/ETI converter - frontProfessional EDI/ETI converter - rear

The commercial 2wcom FlexXtract+ DAB+ Distribution Extractor demodulates an incoming DAB+ data stream, even if it is via IP, ASI or from a DVB-S or DVB-S2 signal and converts the data into a standard ETI-signal according to EN 300799 or an EDI-signal according to TS 102 693 to feed DAB or DAB+ transmitters.

  • Advantages
    • Supports for IP line transmission (strong robustness):
      • Forward error correction (Pro-MPEG FEC, EDI-FEC): enables reconstruction of lost data packets, avoids audio dropouts
      • Packet reordering: incoming data packets are sorted into original order if the IP network swaps them
      • Seamless switching (dual streaming) [optional]: automatic seamless switch to a second incoming stream if the main stream fails for some reason
      • Data spreading/reordering [optional]: time scrambling of data packets over a defined period to protect the stream like a swarm against transmission failures
      • Satellite backup*: automatic switch to the satellite backup if the main stream fails for some reason
        * Seamless switching available as an option
    • Several contribution/distribution technologies supported (E1, Satellite, IP, ASI)
    • Fallback solutions between these in case of failure (e.g. satellite as backup)
    • Easy handling: One device for different applications
  • Three different possibilities of transport stream input
    • DVB-S/S2 tuner
    • ASI (optional)
    • Ethernet (optional)
  • Data output
    • ETI: Standardized output stream from a DAB/DAB+/T-DMB multiplexer over a standardized 2Mbit link (E1).
    • EDI (optional): EDI performs data transmission via global IP network (ETI via IP). Compared to ETI there is no need of a dedicated line.
  • Transport stream output (optional)
    • ASI
    • Ethernet
  • Monitoring and Control
    • via webbased GUI
    • via Satellite In-Band Remote Control (SIRC)
      (e.g. changing configuration, firmware update, relay switching)
    • via SNMPv2c and relay (RF and ETI/EDI parameters)
  • Conditional Access Decryption
    • On request

Datasheet for FlexXtract+ DAB+ Distribution Extractor (PDF, 500kb)