NC06 Network Control Device

TCP/IP - SNMP GPIO Device
Monitor and control different devices - digital or analog - via SNMP
and combine systems to a single supervision system

• Take the chance to integrate existing equipment to the
  new world of SNMP and TCP/IP
• Incoming information and necessary switching activities can be used to carry out
  direct control automatically
• Information just on demand:
  Improve the efficiency of your maintenance staff in saving time and costs
• Improve your budget:
  Assists you to eleminate weak spots in your system in the long term
  
• Overall performance:
  Getting an exact malfunction analysis for your statistical interpretation
• Customized configuration via WEB-interface
  
  

Overview

With the NC06 Network Control Device you can monitor and control your remote sites from anywhere using the Internet or serial cable.

The NC06 uses the Simple Network Management Protocol ( SNMP v2) a protocol used by many large computer networks worldwide. No software is needed to manage the NC06 since you can do everything with a Web browser.

Access is secure with three password protected levels ( Read-only, Full, Administrator)

Alert and alarm conditions are fully configurable by site and attached device and can be sent to a server and/or to Email addresses.

Technical Details

The NC06 has 32 opto-isolated digital inputs, 16 relay contacts, a serial port and a TCP/IP interface. Each input and output is individual configurable via web interface.

Hardware

The box is a standard 19" by 1 R/U. At its heart is a powerful microcomputer for controlling the hardware functions, the web interface and all other functions of the NC06.

On the front of the NC06 are 32 tricoloured leds which reflects the status of each input and 16 red leds which reflects the status of each output. Five tricoloured leds display the status of the NC06.